Product Features：

Small size, long service life, good seismic resistance, and strong impact resistance.

Product parameters:

Power supply voltage: DC5V ± 0.25V

Power supply current: 15mA MAX

Data interface: 4-wire SPI output (3-wire SPI optional)

Resolution: 16bit

Angle measurement range: 360 °

Output noise: 1LSB MAX

Reaction time: 3.5 μ S MAX

Hysteresis: 5LSB MAX

Independent linearity: ≤ ± 0.3%

Dielectric withstand voltage: 500VAC, powered on for 1 minute, leakage current ≤ 1mA

Insulation resistance: 500VDC, ≥ 500M Ω

Continuous electrification life: ≥ 1000h

Rotating torque: ≤ 3mN · m

Weight: ≤ 20g

Specification and length of outgoing line: AFR-250 · 0.14mm2, length ≥ 100mm

Identification of outgoing end: VDD (red), GND (black);

CSn (blue), CLK (white);

MISO (yellow), MOSI (green)

Logo: Manufacturer's trademark, model, independent linearity, product number

Shell material: stainless steel or aluminum alloy or magnetic material

Working temperature: -55 ℃~+85 ℃

Temperature shock: -55 ℃~+85 ℃, 10 cycles

High temperature operation:+85 ℃± 2 ℃, 1 hour

Low temperature operation: -55 ℃± 2 ℃, 1 hour

Impact: 50g~2000g

Vibration: 15g

Humidity resistance: GJB 360B-2009 Method 106

IP protection level: IP50

ESD level: 2000VMAX

Quality level: military/general military

Product application:

Widely used in aviation, aerospace, weapons, ships, communication, automatic control, automobiles and other fields, it is a displacement sensor made using the principle of magnetoelectric induction (Hall effect/magnetoresistive effect), used to detect physical quantities such as angular displacement and angular velocity.

CJW-CZ-1504.pdf

Product features:

Small size, long service life, good seismic resistance, and strong impact resistance.

Product parameters:

Power supply voltage: DC12V~18V

Rated power consumption: ≤ 1W

Effective electrical stroke: 0 °~60 °

Independent linearity: ≤ ± 0.3%

Rotation direction: CW

Repeatability: ≤ 0.3%

Accuracy: ≤ 1%

Output signal: 4mA~20mA

Speed: ≥ 10rpm

Resolution: 12bit

Weight: ≤ 100g

Outgoing end identification: VDD (red), GND (black), Vout (white)

Specification and length of outgoing line: AFR-250 · 0.2mm2, length 500mm ± 50mm

Logo: Manufacturer's trademark, model, and product number

Shell material: stainless steel or aluminum alloy or magnetic material

Storage temperature: -55 ℃~+85 ℃

High temperature operation:+70 ℃, 2 hours

Low temperature operation: -55 ℃, 2 hours

Temperature shock: -55 ℃~70 ℃, 3 cycles

Fluid contamination: Test according to GJB 150.26 for fluid contamination

Temperature Humidity Height: Conduct the test according to the provisions of Procedure III identification in GJB 150.24A-2009

Damp heat test: Conduct the test according to GJB 150.9A-2009

Mold test: Conduct the test according to GJB 150.10A-2009

Salt spray test: Conduct the test according to GJB 150.11A-2009

Vibration test: Conduct the test according to GJB 150.16A-2009 "Vibration Test"

Impact test: Conduct the test according to Procedure I "Functional Impact Test" in GJB 150.18A-2009

Acceleration: According to the provisions of GJB 150.15A-2009

Quality level: military/general military

Product application:

Widely used in aviation, aerospace, weapons, ships, communication, automatic control, automobiles and other fields, it is a displacement sensor made using the principle of magnetoelectric induction (Hall effect/magnetoresistive effect), used to detect physical quantities such as angular displacement and angular velocity.

CJW-CZ-2101.pdf

Product features:

Small size, long service life, good seismic resistance, and strong impact resistance.

Product parameters:

Power supply voltage: 3VDC~7VDC

Effective electrical stroke: 80 ° ± 0.5 °

Independent linearity: ≤ ± 0.2%

Rotation direction: CCW

Output interface: CAN signal

Resolution: 15bit

Data output time: 50N μ S (N=2-15)

Dielectric withstand voltage: 500VAC, powered on for 1 minute, leakage current ≤ 1mA

Insulation resistance: 50VDC, ≥ 50M Ω

Mechanical stroke: 360 ° continuous

Starting torque: ≤ 1mN · m

Weight: ≤ 80g

Identification of outgoing end: VDD (red), GND (white), CAN+(yellow), CAN - (blue)

Specification and length of outgoing line: AFR-250 · 0.15mm2, length ≥ 200mm

Logo: Manufacturer's trademark, model, and product number

Shell material: stainless steel

Temperature shock: -50 ℃~+70 ℃, 3 cycles

High temperature operation:+70 ℃, 6h

Low temperature operation: -50 ℃, 6h

Acceleration: X-axis+15g, -6g; Y. Z-axis ± 60g

Vibration: 10.25g in Y direction, 9.93g in Z direction, 30 minutes in each direction

Work impact: back peak sawtooth pulse, peak acceleration 40g, time 11ms, ± X, ± Y, ± Z, 3 times in each direction

Other impacts: half sine wave, peak acceleration 12g, duration 20-40ms, direction Y, 300 times

IP protection level: IP67

Quality level: military/general military

Product application:

Widely used in aviation, aerospace, weapons, ships, communication, automatic control, automobiles and other fields, it is a displacement sensor made using the principle of magnetoelectric induction (Hall effect/magnetoresistive effect), used to detect physical quantities such as angular displacement and angular velocity.

P25 CJW-CZ-2501.pdf

Product features:

Small size, long service life, good seismic resistance, and strong impact resistance.

Product parameters:

Power supply voltage: 5V~18V

Power supply current: 55mA MAX

Data interface: SPI (differential)

Resolution: 15bit

Angle measurement range: 360 °

Rotation direction: CCW

Independent linearity: ≤ ± 0.3%

Repeatability: ≤ ± 0.03%

Output code: Typical Gray code

Dielectric withstand voltage: 1000VAC, powered on for 1 minute, leakage current ≤ 1mA

Insulation resistance: 500VDC, ≥ 20M Ω

Continuous electrification life: ≥ 1000h

Rotating torque: ≤ 3mN · m

Weight: ≤ 60g

Specification and length of outgoing line: AFR-250 • 0.12mm2, with a length of ≥ 1000mm. The outgoing line is equipped with an external wave proof sleeve

Identification of outgoing end: VDD (red), GND (black);

CLK+(green), CLK - (blue);

DA+(yellow), DA - (white), reset (gray);

Logo: Manufacturer's trademark, model, independent linearity, product number

Shell material: stainless steel

Working temperature: -55 ℃~+70 ℃

Temperature shock: -55 ℃~+70 ℃, 3 cycles

High temperature operation:+70 ℃± 2 ℃, 1 hour

Low temperature operation: -55 ℃± 2 ℃, 1 hour

Impact: GJB 150.18A-2009

Vibration: GJB 150.16A-2009

Humidity resistance: GJB 360B-2009 Method 106

IP protection level: IP50

ESD level: 2000VMAX

Quality level: military/general military

Product application:

Widely used in aviation, aerospace, weapons, ships, communication, automatic control, automobiles and other fields, it is a displacement sensor made using the principle of magnetoelectric induction (Hall effect/magnetoresistive effect), used to detect physical quantities such as angular displacement and angular velocity.

SCJ28-3-13I360BCH.pdf

Product features:

Small size, long service life, good seismic resistance, and strong impact resistance.

Product parameters:

Power supply voltage: 10V ± 0.1V

Rated power consumption: ≤ 1W

Angle measurement range: not less than ± 40 °

Output gradient: Theoretical gradient 110V/°

Output accuracy: -0.4 °~+0.4 °

Zero position consistency: The zero position output voltage is 5V, and the consistency error between the two circuits is ≤ ± 10mV

Resolution: ≤ 0.025 °

Repeatability error: ≤ ± 3mV

Rotation direction: CW

Insulation resistance: Normal state: ≥ 200M Ω (250VDC)

Wet and hot state: ≥ 2M Ω (250VDC)

Dielectric withstand voltage: 250VAC, 1min; Leakage current ≤ 1mA

Friction torque: ≤ 3g · cm

Weight: ≤ 80g

Identification of outgoing end: First route: VDD (red), GND (black), Vout (white)

Second route: VDD (yellow), GND (blue), Vout (green)

Shaft/radial clearance: under a force of 2.3N, the axial clearance is ≤ 0.03mm, and the radial clearance is ≤ 0.03mm

Specification and length of outgoing line: AFR-250 • 0.14mm2, length 250mm ± 10mm

Logo: Manufacturer's trademark, model, independent linearity, product number

Shell material: Magnetic material (stainless steel or aluminum alloy optional)

Working temperature: -55 ℃~+70 ℃

Temperature shock: -55 ℃~+70 ℃, 3 cycles

High temperature operation:+70 ℃± 2 ℃, 2 hours

Low temperature operation: -55 ℃± 2 ℃, 2 hours

Additional error for high and low temperatures: not greater than ± 0.5 °

Acceleration: According to GJB 150.15A-2009, the overload values for axial and radial performance tests are 8.25g and 5g respectively. After the product reaches the experimental values, it should be maintained for 1 minute

Impact: GJB 150.18A-2009

Vibration: According to GJB 150.16A-2009, the fixed mass on the product shaft is (11 ± 0.5) g, and functional and durable vibration tests are conducted on the three axes respectively

Humidity resistance: GJB 360B-2009 Method 106

Quality level: military/general military

Product application:

Widely used in aviation, aerospace, weapons, ships, communication, automatic control, automobiles and other fields, it is a displacement sensor made using the principle of magnetoelectric induction (Hall effect/magnetoresistive effect), used to detect physical quantities such as angular displacement and angular velocity.

Y GGJ48-4100-00.pdf